It’s always a good idea to clean your dartboard on a regular basis. Not only will this help keep it looking new, but it will also help maintain the quality of your darts. In this article, we will describe how to clean some of the most dartboards and get rid of any mold formed on your board. We’ll also give you some tips on how to keep your dartboard in good condition for years to come!
- Why Should You Clean Your Dartboard?
- How to Clean a Dartboard (Electronic, Bristle, Wooden)
- How Often Should You Clean a Dartboard
- How to Clean Mold off a Dartboard
- Tips to Clean and Maintain Your Dartboard
Why Should You Clean Your Dartboard?
Despite being built with good materials, a dartboard will eventually wear out and decrease in quality, especially if you play regularly. Not keeping it clean will push your dartboard to the point where it’s unable to use even faster.
A dartboard might not be a very big investment. But to get the most out of it, you should clean your dartboard regularly to maintain it in good condition. Cleaning a dartboard is quite an easy task and not time-consuming as many people think. We’ll show you how to do it.
How to Clean a Dartboard (Electronic, Bristle, Wooden)
Different kinds of dartboards have different ways of cleaning, depending on their materials. In the next sections, we’ll show you how to clean some of the most popular types, including electronic, bristle, and wooden dartboards.
How to Clean an Electronic Dartboard
Since an electronic dartboard is made of plastic, it’s quite fast and easy to clean.
First, unplug your electronic dartboard from the power source. Then, use a soft cloth to get rid of any dirt or debris accumulated over time on the surface. Next, use a damp cloth to wipe down the board. You can use a mild soap if needed. Be sure to avoid getting the board too wet.
Then, use a dry cloth to remove any moisture. Finally, use a cotton swab or soft brush to clean any hard-to-reach areas, such as the crevices between the scoring buttons.
How to Clean a Bristle Dartboard
Bristle dartboard is the most popular type. It’s also the most tricky one to clean. Many people just spray water on the surface or wipe it with a soapy wet cloth. These cleaning ways would downgrade or even ruin the dartboard very quickly.
Here are 5 steps to clean your bristle dartboard:
Step 1. Clean the outer ring
The outer ring is the ring that holds the score number. If you can, remove it from the board. You will see it holds a lot of built-up dirt and leave a lot of dirt on the board surface.
Then, give the ring a good clean-through. You can also use corrosion inhibitors to prevent it from rusting.
Step 2. Wipe with a dry cloth and vacuum the board
Use a dry cloth to wipe down the loose dirt on the surface first. Then, use a low-pressure vacuum to “suck out” the remaining dirt. This is a much better way of spraying water or using any chemicals to clean the board.
Step 3. Wipe with a soft and very-slightly damp cloth
If you want to be more careful, use a soft and slightly damp cloth to wipe down the stains and hard-to-remove dirt on the board. But remember to squeeze as much water out of the cloth as possible. The last thing you want is to let your board get wet since the fiber can absorb water and get bloated, thereby ruining the dartboard.
Step 4. Wipe again with a dry cloth
Wipe the board one last time with a dry cloth to remove the moisture. At this point, your dartboard should be clean.
Step 5. Put the outer ring back in and rotate
If you remove the outer ring as the first step, the last step is to put it back in. Here’s the tip: rotate the outer ring so that the score numbers are placed at new positions.
Players tend to hit particular areas more than others. For example, the triple-20 section since it gives the most points. Therefore, rotating the outer ring makes different areas get even hits, helping the dartboard to stay in good condition as a whole.
That’s the process of how you should clean a bristle dartboard.
How to Clean a Wooden Dartboard
Wooden dartboards were popularly used before bristle and electronic dartboards arrived. Now, it’s not something you normally see.
A wooden dartboard requires regular maintenance. Since it is made of wood, you’ll need to soak it up when it’s not in use to prevent it from drying and cracking up.
Make sure not to clean the board when it’s soaking and softening. Hang it out in the sun for 30-60 minutes to dry it out a little bit. When it’s damp enough, lightly and carefully brush the surface with a dry cloth or a toothbrush.
How Often Should You Clean a Dartboard
Dartboards, whether they are electronic, bristle, or wooden should be cleaned on a regular basis. How often you need to clean your dartboard depends on the type of board and how often it is used. Cleaning your dartboard regularly will help to keep it in good condition and prolong its life.
Here are some general guidelines:
- Clean an electronic dartboard after each use since it’s easy to clean due to the plastic material
- Clean a bristle dartboard at least once a week. More often if it is used frequently.
- Make sure to soak up a wooden dartboard regularly for maintenance and clean it accordingly.
How to Clean Mold off a Dartboard
The most important thing to remember is don’t use any chemicals to spray on the board to kill the mold. It might do the job of removing the mold, but it also ruins your dartboard.
So, how to clean mold off a dartboard? First, leave the board under the sun for several hours. Remember to check on it to make sure the sun helps remove the mold from the dartboard but does not damage it.
After that, bring it back inside and carefully clean the remaining mold with a brush or a toothbrush.
Here’s the best tip to clean mold off a dartboard: don’t let it happen! Since mold easily grows in a warm and wet environment, the best way to prevent your dartboard is to keep it in a dry and cool place. Cleaning the board also helps. Remember to clean it regularly or at least once in a while even if you don’t use it.
Tips to Clean and Maintain Your Dartboard
We’ve shared with you some tips here and there in this blog. Let’s summarize them here:
- Don’t spray water or liquid on the board, even when it has mold
- Rotate the outer ring often for different areas on the board to get hits evenly
- Keep the board in a dry and cool place
- Clean the board regularly to make it long-lasting and reduce the chances of getting mold
- Use something to cover or put it into a bag if you don’t play darts often
Cleaning a dartboard should be easy and fast if you take care of it often. We’ve shared with you the steps on how to clean a dartboard, according to each type, and the tips to maintain it in good condition. Remember to follow and clean your dartboard regularly. Thanks for reading!
Articles and Insights
Yes, soft-tip darts can damage walls when you throw with great force. Learn more about in detail and how to protect your walls from any potential damage.
Feb 2nd, 2023
Many people do not think of darts players as athletes because darts are often associated with pubs and beers. Is it true? Find your argument in our article.
Dec 26th, 2022
What weight do pro darts players use? Discover the darts weight pro players prefer. Find the secrets of successful darts pros and get ahead in the game today!
Dec 26th, 2022